
Switching off the child safety device
Step Control panel Pilot light
1.
Switch on appliance. Do not set a heat setting. above lights up
2.
Touch for 4 seconds above goes out
3.
Switch appliance off.
The child safety device is switched off.
Switching the power function on and off
The power function
makes more power
available to the induction cooking zones, e.g.
to bring a large quantity of water to the boil
quickly. The power function is activated for
10 minutes at most. After that the induction
cooking zone automatically switches back to
heat setting 9.
Control panel Display
To switch on
Touch The light elements in the control bar light up. The
display flashes
To switch off Select the heat setting
1-9
The heat setting selected is shown in the display. The
display above
will go out.
Power Management
The cooking zones of the cooking surface
have a maximum power available to them.
Maximum power is reached if all cooking
zones are set to a heat setting of 9. Two
cooking zones make up a pair (see figure).
Between these cooking zones the maximum
power available is distributed by the Power
Management. If the Power function is set for
a cooking zone, the additional power needed
for this cooking zone is transferred by the
Power Management reducing the power of
the other cooking zone in the pair.
Example: heat setting 9 is selected on a
cooking zone. The Power function is switch-
ed on for the cooking zone paired up with it.
The Power function is performed, but heat
setting 9 on one cooking zone and Power
function on the other cooking zone of a pair
exceeds the maximum output for both.
Therefore Power Management reduces the
first cooking zone that was switched on from
9 to 5, for example, and the display for this
cooking zone alternates between 9 and 5
and then remains on the current maximum of
5. (Whether the display alternates between 9
and 5 or 9 and 3 or other values, depends on
the appliance type and the size of the cook-
ing zone.)
Using the timer
Function Condition Outcome after the time has elapsed
Automatic cut-out a heat setting is set acoustic signal
00
flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00
flashes
electrolux 7
Comentarios a estos manuales